Characteristics of fully automatic hydraulic cutting machine (die-cutting machine) with conveyor
The positioning mechanism for cutting, with an accuracy of ± 0.02mm, can perform both full and half cut die-cutting at the same time, with a minimum fine adjustment of 0.01mm for cutting accuracy.
Independent touch screen interface, easy to operate, and can remember 300 different cutting programs.
Servo motor control feeding system.
Under the condition of a cutting stroke of 20mm and a feeding distance of 10mm, the cutting speed can reach 45 times per minute.
Adjustable center knife clamping device, improving the efficiency of replacing knife molds of different sizes.
Ring shaped Swiss imported belt conveyor.
Belt cleaning wheel device, static electricity removal device, oil temperature cooling device.
Waste rewinding and finished product receiving device.
Safety cover and safety electric eye.
Italian belt deviation correction device ensures a belt conveying error of 0.02MM
Application of fully automatic hydraulic cutting machine (die-cutting machine) for conveying
1. This machine is suitable for large-scale factories to use forming knife molds to continuously cut large quantities of non-metallic materials such as carpets, leather, rubber, fabrics, electronic shielding materials, backlight modules, protective films, insulation materials, tape, and other rolled materials
2. The conveying part is controlled by PLC, and the servo motor drives the material to be input from one side of the machine. After die-cutting, it is output from the other side to ensure accurate feeding and smooth operation; And the feeding length can be easily adjusted through the touch screen.
3. The main machine adopts a four column guide, double crank balance, four column lock fine adjustment mechanism, and hydraulic system control to ensure the cutting speed and accuracy of the machine. All sliding connection parts adopt a central oil supply automatic lubrication device to minimize wear and tear.
4. The input and output of materials are transported on the conveyor belt, and the die-cutting and punching of materials are also automatically completed on the conveyor belt.
5. The use of Italian photoelectric deviation correction device ensures the accurate operation position of the conveyor belt.
6. The feeding and discharging ports in the cutting area of the machine are equipped with safety light curtains to ensure the personal safety of the operator.
7. The fixation of the knife mold adopts a pneumatic clamping device, making it convenient and fast to replace the knife mold.
