Computer controlled single/double sided automatic feeding precision four column double cylinder automatic balance hydraulic cutting machine/stamping machine
Characteristics of coil hydraulic die-cutting machine
*Double oil cylinders and precise four column automatic balancing linkage mechanism ensure even cutting depth in the cutting area
*The pressure is stable and there will be no continuous cutting or edge burrs when cutting environmentally friendly materials
*Being able to cut steel plates can prevent the phenomenon of cutting plate powder sticking to the finished product
*Due to precise cutting balance, it can effectively reduce the loss of the cutting die and cutting board
*PLC programmable control, single and double motor automatic feeding mechanism
*The frequency conversion buffer system achieves alignment accuracy of ± 0.2mm
*The cutting board micro motion device ensures that each cutting will not be in the same position, ensuring good cutting edge effect
*Two stage cutting can effectively solve the problem of curvature when cutting pearl cotton and sponge, while reducing the size error of each layer when cutting multi-layer materials
*Double sided motor automatic feeding mechanism, which can simultaneously cut different heights of knife molds on both sides to improve work efficiency by 80%
*The encoder position display controls the cutting depth, with an error of 0.01mm
*Imported four column stop mechanism improves cutting position accuracy (option)
Process technical requirements for coil hydraulic die-cutting machine
1. Table lifting speed: 100MM/S
2. Accurate cutting balance can effectively reduce the loss of the cutting die and cutting board; The frequency conversion buffer system achieves alignment accuracy of ± 0.2mm.
3. The cutting board micro motion device ensures that each cutting will not be in the same position, ensuring good cutting edge effect.
4. Double sided motor automatic feeding mechanism, which can simultaneously cut different heights of knife molds on both sides to improve work efficiency by 80%. The human-machine interface adjustment makes the operation more user-friendly. The adjustment of pressure and stroke parameters is controlled by the touch screen.
4. Pressure display and control of cutting pressure, using a differential circuit to achieve rapid descent.
5. The encoder position display controls the cutting depth, with an error of 0.01mm
6. When cutting multiple layers of materials in a two-stage cutting method, the size error of each layer is reduced.
Coil hydraulic die-cutting machine with Storage tank quick cylinder:
Here we focus on the features of the quick cylinder with Storage tank: the quick cylinder with Storage tank is a hydraulic system designed according to the customer's requirements for quick action and oil temperature control below 55 degrees. This hydraulic system is based on the Storage tank at the upper end of the oil cylinder to store the oil discharge when the oil cylinder rises. However, when the oil cylinder drops, a large amount of hydraulic oil is required to fill the working chamber. At this time, the oil in the Storage tank can quickly fill the working chamber, To accelerate speed and improve work efficiency, and because hydraulic oil does not enter the oil tank and directly enters the working chamber through hydraulic circulation, the oil temperature can be greatly reduced within the same working time. At present, the manufacturers use both medium speed and ordinary cylinders, and after 8 hours of continuous operation, the oil temperature will increase, resulting in a low service life of the hydraulic system. The use of oil cylinders with Storage tank will not increase the oil temperature, greatly improving the service life of the hydraulic system.
