DP-650FQ standard lamination and cutting machine
According to customer needs, it can have functions such as multi-layer lamination and waste disposal
1. Technical parameters
Machine speed: 80m/min
Raw material z large width: 650mm
Discharge diameter: 600 mm
Film diameter: 350mm
Winding diameter: 450mm
Voltage: 220V 50HZ
Host power 2.2kw
Total power: 3kw
Raw material z Large aperture: 3 ″
Compressed air source: (0.4-0.6) Mpa (provided by the customer)
Standard slitting finished product z small width: 25MM
Host size: 2400 * 2000 * 1500mm
Weight: 1.5T
2. Discharge device
2 sets of discharge gas expansion shafts (3 "key bar type gas expansion shaft)
Magnetic powder brake 25N (Zhejiang) 1 set
Film release magnetic powder brake 25N (Zhejiang) 1 set
2 sets of discharge tension control system (Zhejiang)
1 set of deviation correction system (voltage deviation correction)
3. Continuation fitting part
1 set of adhesive roller ¥ 80 (polyurethane) for lamination
1 set of adhesive roller ¥ 80 (polyurethane) for lamination
1 set of aluminum guide rollers (surface hard oxygen treatment)
1 set of adjustable pneumatic roller up and down system
Electronic counter (Zhejiang) 1 set
1 set of film release tension adjustment system
4. Coiling section
1 set of material receiving inflatable shaft (3 "key bar type inflatable shaft)
Magnetic particle clutch 25N (Zhejiang) 1 set
2 sets of material tension control system (Zhejiang)
Main motor (Shanghai) 1 set
1 set of main motor frequency converter (Shenzhen)
1 set of pneumatic up and down device for coiling shaft (lifting, lowering, supporting)
5. 1 set of switchboard control box
6. Electric control operation panel
