Characteristics of the three beam and four column hydraulic press:
The three beam and four column structure is economical and practical. The hydraulic control adopts an integrated system of plug-in valves, reducing leakage points. The action is reliable, and the service life is long. It can achieve two forming processes: fixed pressure and fixed stroke, and has a pressure holding delay function. The working pressure stroke can be adjusted within the specified range. The button is used for centralized control, which can achieve manual, semi-automatic, and automatic operation modes.
1. Customizable hydraulic press with various models of lower top cylinder
2. Blanking buffer device
3. PLC touch screen control shunt
4. Quick stroke filling device
5. 20T --1000T can be customized according to customer requirements
※ Functions of the three beam and four column hydraulic press:
This series of hydraulic presses is suitable for the pressing process of plastic materials, such as stamping, bending, flanging, thin stretching, etc. It can also be used for correction, pressing, and molding of plastic and powder products.
Scope of application of the three beam and four column hydraulic press: (die-casting edge cutting machine, hydraulic press, hydraulic press, die-casting edge punching machine, hydraulic edge cutting machine, edge cutting machine, aluminum product edge punching machine, aluminum magnesium product edge cutting machine)
This series of hydraulic presses is used for punching and shaping the rough edges of various aluminum and magnesium alloy die-casting products, as well as for cutting plastic products; It is also suitable for forming plastic materials, such as blanking and stretching of sheet metal. It is an upgraded product of TM106 common type. It uses advanced hydraulic circuit of slave and master cylinders. No matter noise, speed, and power consumption, it is superior to the common Hydraulic press. It is a new generation of Hydraulic press with high efficiency, high speed, high output, and high environmental protection. This machine is most widely used in the die-casting industry
Product features of the three beam and four column hydraulic press:
1. This series of hydraulic machine tools uses 2-20MPA liquid pressure as the power source, and is externally connected to a three-phase AC380V 50HZ or three-phase AC220 60HZ AC power supply
2. This series of equipment uses liquid as the medium to transmit energy, and adopts advanced hydraulic circuits for primary and secondary cylinders. The oil temperature is low, and the idle stroke speed is above 150MM/s, while the working speed is below 30MM/s
3. When the device is in standby mode and moving up and down quickly, the noise should not exceed 75 decibels
4. Adopting a four column and three plate structure, the vertical accuracy of the movable plate is controlled by four precision guide sleeves, and the parallel accuracy of any point on the lower and upper working surfaces reaches below 0.1MM
5. The punching machine has a waste gas blowing assembly and a waste material chute is opened in the center of the lower workbench
The bottom dead center position of the punching machine is generally controlled by pressure switches and position sensors
7. It has an automatic counting function, with two control modes: manual and semi-automatic. The pressing upper mold can be manually stopped within any travel range, equipped with an emergency rebound button, and can also be equipped with an infrared hand protection device
8. The pressure, stroke, punching speed, blowing time, and closing height can be adjusted by customers for easy operation;
9. The hydraulic system is equipped with a built-in oil tank at the bottom, which has a clean and stable appearance
